Affiliate links: as an Amazon Associate, Atelier Malin earns a commission if you buy, at no extra cost to you.
ENEACRO ENRH3201
To drill concrete at home without a fight, this is the rotary hammer to get
Check the price on Amazon- 4.6/5 from 3,533 ratings
- Drill, rotary hammer, hammer and chisel modes
- SDS-plus, corded, 7.4 J claimed
Other options
This article contains affiliate links. Learn more
🗓️ Prices checked on October 27, 2026
Written by Julien · Reviewed by Nadia on 10/27/2026 (prices, links and availability checked) — our editorial pen names
The ENEACRO ENRH3201 at $109.95 for drilling concrete at home
The short answer: the ENEACRO ENRH3201 is the SDS-plus rotary hammer to buy for home use: $109.95 on Amazon.com (checked October 27, 2026), 4.6/5 from 3,533 ratings, and 7.4 J per blow by the maker’s figure. If you drill every week, the Bosch 11255VSR Bulldog Xtreme ($174.99) is lighter and better rated.
See the ENEACRO ENRH3201 on Amazon →The four rotary hammers compared
Each model in detail
Who should skip it
What really matters when you choose
Frequently asked questions
Our verdict
Your regular drill spins and spins against a concrete wall and the hole barely starts. In concrete, it isn’t rotation speed that drills, it’s the blow, and that’s exactly what a rotary hammer delivers. Still hesitating between the two families? Our hammer drill vs rotary hammer guide settles it. More in our Drilling & Driving section.
The four rotary hammers compared
Four corded 120 V rotary hammers with an SDS-plus chuck, the standard for drilling concrete at home, in stock on Amazon.com on October 27, 2026, from $54.79 to $176.26. SDS-plus is what they all share: the bits lock in without a chuck key and take the blows, which a regular drill chuck can’t handle.
| Rotary hammer | Impact energy (brand) | Concrete capacity | Price (Oct 27, 2026) | Amazon.com rating |
|---|---|---|---|---|
| ENEACRO ENRH3201 — our pick | 7.4 J (5.5 ft-lbs) | 1-1/4 in. | $109.95 | 4.6/5 (3,533) |
| Bosch 11255VSR Bulldog Xtreme | 2.7 J (2.0 ft-lbs) | 1 in. class | $174.99 | 4.7/5 (3,036) |
| DeWalt D25263K | 3.0 J (2.2 ft-lbs) | 1-1/8 in. | $176.26 | 4.7/5 (1,563) |
| DESHUO 1 in. SDS-plus | 3 J (2.21 ft-lbs) | 1 in. | $54.79 | 4.5/5 (506) |
Each model in detail
ENEACRO ENRH3201
$109.95
4.6/5 — 3,533 ratings
13 A · SDS-plus · 4,200 bpm · drill, hammer, rotary hammer and chisel modes · corded
Good to know: the 13 A rating is the current the motor draws, not the impact energy. The number that decides drilling speed is the energy per blow, in joules: ENEACRO claims 7.4 J, the highest on this page, in a 12.6 lb body (bare tool, per the listing).
See the price on Amazon →Bosch 11255VSR Bulldog Xtreme
$174.99
4.7/5 — 3,036 ratings · sold by Amazon.com
7.5 A · SDS-plus · 0–1,300 rpm, 0–5,800 bpm · 3 modes · vibration control · D-handle
Good to know: one of the best ratings on the page, on a big volume of reviews. What you pay for is balance in hand and consistency over series of holes, not record power.
See the price on Amazon →DeWalt D25263K
$176.26
4.7/5 — 1,563 ratings · sold by Amazon.com
8.5 A · 1-1/8 in. SDS-plus · 3.0 J · Active Vibration Control (“Shocks”) · clutch · kit box
Good to know: its vibration control and its integral clutch, which reduces the kick if the bit jams, are what you feel after fifty holes. It also fits DeWalt’s D25301D dust extraction attachment, per the listing.
See the price on Amazon →DESHUO 1 in. SDS-plus
$54.79
4.5/5 — 506 ratings
9 A · 0–1,100 rpm, 0–5,300 bpm · 3 J claimed · 4 modes · 7.2 lbs · corded
Good to know: it publishes its impact energy, 3 J, a fair figure for drilling anchors at home, and the seller lists a 24-month warranty. The brand says it outright: made for DIY, not for heavy demolition.
See the price on Amazon →Who should skip it
If you only hang a few frames a year on drywall or wood, you don’t need a rotary hammer: a good cordless drill is lighter and drives screws too. And if your job is breaking up a slab rather than drilling it, look at SDS-max demolition hammers, a heavier category.
What really matters when you choose
Impact energy, not amps
That’s the number that counts, in joules (or ft-lbs in the US: 1 ft-lb is about 1.36 J). A 2 to 3 J rotary hammer comfortably drills concrete for household fastening: anchors, ledger boards, furniture brackets. The amps printed big on the box measure what the motor draws, not how hard it hits: two 8 A tools can strike very differently.
SDS-plus means the bit takes the blow
On a rotary hammer, the bit isn’t clamped in jaws: it slides in a grooved shank that lets it take the impact. That’s why an SDS-plus bit won’t fit a regular drill, and why a round-shank bit has no place in a rotary hammer. The two worlds don’t mix.
A hammer drill is not a rotary hammer
A hammer drill makes a fast, light vibration with two ribbed discs rubbing together: it gets through brick or soft block if you lean on it. A rotary hammer strikes with a piston, much harder and much slower. In concrete, the gap isn’t about comfort, it’s about whether the hole happens at all.
The chisel mode earns its keep
All four offer a hammer-only mode, with no rotation, to knock off tile, rough out a channel or remove old thinset. You don’t buy a rotary hammer for it, and you always end up using it during a remodel. Keep a shop vac close: concrete dust contains crystalline silica.
Frequently asked questions
Rotary hammer or hammer drill: which should I buy?
If you mostly drill wood and metal and the occasional brick, a hammer drill is enough. For concrete, rebar-reinforced concrete or repeated anchors in hard material, the rotary hammer is the right tool: it drills faster, with far less effort, and without burning through bits.
How much impact energy do I need?
2 to 3 joules for home use: anchors, ledger boards, through-holes in a foundation wall. 3 to 5 J for regular work or reinforced concrete. Beyond that, you’re into heavy chiseling and SDS-max, a different shank standard.
Will my regular drill bits work in a rotary hammer?
Not directly. An SDS-plus rotary hammer only takes SDS-plus bits, recognizable by their grooves. For round-shank bits in rotation-only mode, Bosch sells an SDS-plus keyless chuck adapter, the HA3JAWC, at $37.99 on Amazon.com (October 27, 2026).
Should I get a cordless rotary hammer?
Cordless is very convenient overhead or far from an outlet, and recent models drill seriously: the DeWalt 20V MAX DCH133B delivers 2.6 J per DeWalt and costs $249.00 tool only on Amazon.com (October 27, 2026). Add batteries and it costs far more than a corded tool, which stays the rational choice for a few uses a year.
How do I drill tile without cracking it?
Start in rotation-only mode, with no hammer, using a bit made for tile, and switch on the hammer only once you’re through the tile. A piece of masking tape on the mark keeps the bit from wandering. Hammering from the first fraction of an inch is the most common cause of chips. Our guide on how to drill tile without cracking covers it step by step.
Our verdict 🧰
For home use, the ENEACRO ENRH3201 at $109.95 covers everything a house asks of a rotary hammer, with 3,533 ratings behind it and the most impact energy on this page. If you drill regularly, the Bosch 11255VSR Bulldog Xtreme ($174.99) or the DeWalt D25263K ($176.26) are better rated and nicer over series of holes: you pay for comfort and consistency, not power. The DESHUO at $54.79 is a real option if budget comes first. And if you’re still torn with a hammer drill: in concrete, it’s not the same class of tool. Your first anchor will tell you.
See the ENEACRO ENRH3201 on Amazon →All our picks are on our recommended tools page, and every drilling guide is in Drilling & Driving.